Newly released BMW diagnostic software
v47.40 for Launch X431.If you have bought Launch x431 tools, like launch x431 idiag, you could update your BMW diagnostic software to
v47.40. What are new on it?
X431 BMW diagnostic software v47.40
launched 16 languages, including Simplified Chinese, traditional Chinese, Spanish,
English, German, Italian, Portuguese, Polish, Japanese, Russian, Turkish,
Greek, French, Serb and Korean.
Compare with the former version, it newly
added the following features:
1. Add special repair function, VTG system oil
change on E83, F01 and E70 chassis.
2. Add ICMQL system adjustment, ICM sensor
system on F01, F25 chassis.
3. Add F01 chassis with special functions,
including HSR function check, rear axle wheel alignment, and start-up HSR rotor
position sensor.
4. Add F01 chassis with ASA START-UP of
active steering function.
5. With newly added functions like DSC
brake bleeding procedure, DSC control unit adjustment, mix-up checks and brake
lines, on F01, F25, F20 and F10 CHASSIS.
6. EHC ride height sensor check, activate compressor,
filling and discharging air from air bellows special functions are added on F01
chassis.
7. Newly added with start-up, fault evaluation;
adapt pressure sensors with fault evaluation, self-diagnosis, and fault
evaluation on F01 chassis ICMV system.
8. add F01, F25, F20, F10, F04 CHASSIS DME
system with Air mass flow sensor, Electric fuel pump, Exhaust backpressure
sensor before exhaust turbocharger, Mean quantity adaptation, Rail pressure
regulating valve, Swirl flap actuator, Consumption calculation, Exhaust-gas
recirculation, Idle speed, Starting torque, Bleeding, fuel system, Regeneration,
particulate filter, Smooth running control, Valvetronic adaptation limit
positions, Valvetronic running-in phase, Injector rate adjustment, Clear
adaptations, Consumption calculation adjustment, Register battery change, Evaluate
battery charge state, Idle speed adjustment, Learning valvetronic limit
position, Ventilation, Cooling system, Display, On-board Diagnosis readiness
codes, and Register starter exchange.
9. Display and reset adaptation values, Immobiliser
reset function, Resetting adaptation function, Oil balancing, Data adjustment,
mechatronics, Flushing function, Format fault memory, Clutch adaptation, Gearbox
adaptation, Learn in of valve characteristic curve, Reset torque characteristic
curve, Parking lock function check, Parking lock hook test and Integrated
electrical pump for F01, F10, F07 chassis EGS system.
10. Reset starter lock, FEM KL15
activation/deactivation, CAS KL15 activation/deactivation, Disable/enable, Personalisation
number and Block/enable newly on CAS of F01, F20 chassis.
11. Add F25, F20, and F20 CHASSIS EPS with
EPS Start-up special function.
12. Initial operation special function is
added to E89 chassis EMF system.
13. Add E39 chassis SRS and EHC with
decoding function
14. F chassis CBS system correction
15. Complete the register battery change
function on F25 chassis DME system
16. Perfect Register battery change and Valvetronic
adaptation limit positions functions on F10 CHASSIS DME.
That is all V47.40 launch X431 software for BMW, totally 16 pieces of newly added
features than that of former versions, I think there will be a better service
for BMW cars with the newest software.
